**
"The exit strategy will be executed this week in the sense that we will be pulling back from our much more active efforts to shape the environment."
Ya know, I never really understood what “horrifying” meant.
Not over a period of years at least.
The Won Everyone Was Waiting For has reduced the gravity of state sanctioned killing by uniformed armed forces to an activity best administrated by a “political committee” to be named by the remaining members of the international debating society that shamed him into doing SOMETHING …
This isn’t amateur hour. This is our country in free fall.
and board them in the smoke.
Democracy expects that every blogger will do his duty.
Firing broadsides of personal opinion since September 2004.
Wednesday, March 23, 2011
Tuesday, March 15, 2011
Sunday, March 06, 2011
Goodbye Old Friend
I don't know what the predicted service life is for one of these, but I got twenty two years out of mine.
Sunday mornings I usually putter around in the reloading room. I tossed about forty pieces of Mosin brass into the tumbler and fired it up and it struck me that I've been using this same piece of equipment since we lived in an apartment in Clairemont, above Mission Beach in San Diego. In a few hours the brass was shiny, so swapped out the cases for some pulled .303 bullets to get rid of the tar sealant the Pakistanis used and clicked the "on" button. It just sat there and hummed.
Goodbye old friend.
Sunday mornings I usually putter around in the reloading room. I tossed about forty pieces of Mosin brass into the tumbler and fired it up and it struck me that I've been using this same piece of equipment since we lived in an apartment in Clairemont, above Mission Beach in San Diego. In a few hours the brass was shiny, so swapped out the cases for some pulled .303 bullets to get rid of the tar sealant the Pakistanis used and clicked the "on" button. It just sat there and hummed.
Goodbye old friend.
Sunday, February 20, 2011
A Glimpse Into The Man Cave
Ten years ago I ran up a deer load for .280 Remington for a friend. He called me up recently and asked if I could put together one for elk, and also do some middle of the road .30-'06 loads for his step son. He provides all the components, I get to practice the craft.
In January I managed to crank out about fifty rounds of .280 Remington 140 grain Sierras for varmints but was only able to get to the elk loads today.
I guess he got a deal on the nickel cases but they are turning out to be a bear to use. They come "sized" according to the literature but after I weighed out fifty charges and tried to seat the bullets on to the loaded cases I found that the case mouths were all too tight. The seating process shaved off nasty amounts of the gilding jackets (Nosler 160 grain AccuBonds over 51.7 grains of IMR 4350) of the first two projectiles, even with their boat tail configuration.

I poured the powder charges back into the cannister and returned it (the powder cannister) to the sub basement, then set up to size all the cases in my Herter's double ram press. This meant I had to remove the decapping pin from the sizing die, which took all of five minutes. I shot the cases with spray lube, gave them a minute to dry, and proceeded to get about half of them sized before I had a stuck case. I destroyed the neck expander/ decapping pin holder in getting the case out of the die.
I think I'll suggest he not buy nickel cases. Brass is our friend. I'd be done now, had I been working with brass cases. Now I've got to time getting off work early enough to hit my reloading supplier to pick up another pin.
But I got fifty rounds of .30-'06 done before any of this kerfluffle. I got to spend time in The Cave.
It's been a good weekend. I hope yours was, too. And there is still Spaghetti Night to come!
No new Mosins recently. I let a Ministry of Defense marked 1939 Tula get away Saturday. That's okay, too, since I can't shoot more than two of the ones I own at one time, anyway. I joke, I joke... here's one of my favorites from downstairs, just for fun:
In January I managed to crank out about fifty rounds of .280 Remington 140 grain Sierras for varmints but was only able to get to the elk loads today.

I guess he got a deal on the nickel cases but they are turning out to be a bear to use. They come "sized" according to the literature but after I weighed out fifty charges and tried to seat the bullets on to the loaded cases I found that the case mouths were all too tight. The seating process shaved off nasty amounts of the gilding jackets (Nosler 160 grain AccuBonds over 51.7 grains of IMR 4350) of the first two projectiles, even with their boat tail configuration.

I poured the powder charges back into the cannister and returned it (the powder cannister) to the sub basement, then set up to size all the cases in my Herter's double ram press. This meant I had to remove the decapping pin from the sizing die, which took all of five minutes. I shot the cases with spray lube, gave them a minute to dry, and proceeded to get about half of them sized before I had a stuck case. I destroyed the neck expander/ decapping pin holder in getting the case out of the die.
I think I'll suggest he not buy nickel cases. Brass is our friend. I'd be done now, had I been working with brass cases. Now I've got to time getting off work early enough to hit my reloading supplier to pick up another pin.
But I got fifty rounds of .30-'06 done before any of this kerfluffle. I got to spend time in The Cave.
It's been a good weekend. I hope yours was, too. And there is still Spaghetti Night to come!
No new Mosins recently. I let a Ministry of Defense marked 1939 Tula get away Saturday. That's okay, too, since I can't shoot more than two of the ones I own at one time, anyway. I joke, I joke... here's one of my favorites from downstairs, just for fun:
Saturday, January 29, 2011
Monday, January 17, 2011
Monday, January 03, 2011
Saturday, January 01, 2011
This Year To Come
Some things I'll be doing or looking for in the coming year:
1. Be True.
2. Nail down my grasp of AutoCADD, at least enough that I am able to effectively resource CADD data to my surveying software.
3. I'd like to see a Fair/Flat Tax act introduced, preferably by spring. I know it won't pass until after 2012 but getting every franchised citizen a skin in the game is the first most important step toward possibly saving the Republic.
4. I know there won't be any rescinding of Obamacare. The most we can hope for is complete defunding of its provisions. While the socialization of the health care system is a crisis for myriad reasons, remember that the primary goal behind Obamacare is that it is designed to expensively and emotionally distract and entangle the House and Senate from addressing the more lethal threats launched by this administration - exponential growth of regulatory agencies and regulations, specifically EPA, FCC, FDA, and FTC, and the transformation of Justice into a political hit squad.
Destroying the world's premiere health care infrastructure is just a step toward controlling the people, not a goal.
It's an attack. Not an administration.
5. Glass bed one of my Mosins. Just because I can.
6. Find a silver coin with my metal detector.
7. Read three good books I haven't read before.
8. Take a straight week off during the summer and see something of the world with the One True Love.
I hope you have a wonderful New Year. Just be ready.
1. Be True.
2. Nail down my grasp of AutoCADD, at least enough that I am able to effectively resource CADD data to my surveying software.
3. I'd like to see a Fair/Flat Tax act introduced, preferably by spring. I know it won't pass until after 2012 but getting every franchised citizen a skin in the game is the first most important step toward possibly saving the Republic.
4. I know there won't be any rescinding of Obamacare. The most we can hope for is complete defunding of its provisions. While the socialization of the health care system is a crisis for myriad reasons, remember that the primary goal behind Obamacare is that it is designed to expensively and emotionally distract and entangle the House and Senate from addressing the more lethal threats launched by this administration - exponential growth of regulatory agencies and regulations, specifically EPA, FCC, FDA, and FTC, and the transformation of Justice into a political hit squad.
Destroying the world's premiere health care infrastructure is just a step toward controlling the people, not a goal.
It's an attack. Not an administration.
5. Glass bed one of my Mosins. Just because I can.
6. Find a silver coin with my metal detector.
7. Read three good books I haven't read before.
8. Take a straight week off during the summer and see something of the world with the One True Love.
I hope you have a wonderful New Year. Just be ready.
Friday, December 24, 2010
EVERYBODY!
Please have a merry, merry Christmas. May your life be filled with joy this most holy of seasons.
May you be surrounded by loving family, and good friends.
May tomorrow bring you opportunity to succeed at being a better person than you are today.
God bless, and may he keep you well.
I am a lucky guy.
May you be surrounded by loving family, and good friends.
May tomorrow bring you opportunity to succeed at being a better person than you are today.
God bless, and may he keep you well.
I am a lucky guy.
Thursday, December 02, 2010
Came to Understand
We don't have a governing class.
They have presumed to be a ruling class.
It's nice to see honest and appropriate descriptive vocabulary every once in a while... but the attack on the Republic is probably going to end up being fought out in the streets.
Fought to the end, in the cold, hungry, dark.
A few years ago some Islamist mook made waves saying that our grandkids would be moslem.
I think there's a better chance they'll be slaves, myself.
They have presumed to be a ruling class.
It's nice to see honest and appropriate descriptive vocabulary every once in a while... but the attack on the Republic is probably going to end up being fought out in the streets.
Fought to the end, in the cold, hungry, dark.
A few years ago some Islamist mook made waves saying that our grandkids would be moslem.
I think there's a better chance they'll be slaves, myself.
Friday, November 12, 2010
Sunday, November 07, 2010
Energy Delivered At A Distance
What's a max load for a .280 Remington, using the 160 grain Nosler Accubond bullet over IMR 4350 powder, new Remington nickel plated cases, Winchester standard large rifle primers?
I'm thinking it must be around 53 grains, just looking at case capacity. I'm also thinking that would be a compressed load.
The available industry info I've been able to research indicates they want folks to use another powder... but I'm working with what I've got. IMR 4350 gives excellent results with heavy bullets in this caliber range.
Rifle is a well- cared for Remington 700 from the eighties.
Take your time. This is for a friend, and for next year's hunt.
I've already put together the varmint knockers - 110gr TNT's over 52gr of 4350. They zip right along.
I'm thinking it must be around 53 grains, just looking at case capacity. I'm also thinking that would be a compressed load.
The available industry info I've been able to research indicates they want folks to use another powder... but I'm working with what I've got. IMR 4350 gives excellent results with heavy bullets in this caliber range.
Rifle is a well- cared for Remington 700 from the eighties.
Take your time. This is for a friend, and for next year's hunt.
I've already put together the varmint knockers - 110gr TNT's over 52gr of 4350. They zip right along.
Monday, October 25, 2010
Unfortunate Word Choice
Now I saw the teaser on Drudge, so made sure that it wasn't just a goof. Nope:
"He said Republicans had driven the economy into a ditch and then stood by and criticized while Democrats pulled it out. Now that progress has been made, he said, "we can't have special interests sitting shotgun. We gotta have middle class families up in front. We don't mind the Republicans joining us. They can come for the ride, but they gotta sit in back.""
Make no mistake about it: we have a childish ideologue occupying the highest office in the land.
His not being very bright is just spice for the mix.
He's about out of my prayers. Even with two years of lame duck to go.
"He said Republicans had driven the economy into a ditch and then stood by and criticized while Democrats pulled it out. Now that progress has been made, he said, "we can't have special interests sitting shotgun. We gotta have middle class families up in front. We don't mind the Republicans joining us. They can come for the ride, but they gotta sit in back.""
Make no mistake about it: we have a childish ideologue occupying the highest office in the land.
His not being very bright is just spice for the mix.
He's about out of my prayers. Even with two years of lame duck to go.
Sunday, October 24, 2010
Didn't See That Coming.
| You are a Social Liberal (60% permissive) and an... Economic Conservative (76% permissive) You are best described as a:
Link: The Politics Test on OkCupid.com: Free Online Dating Also: The OkCupid Dating Persona Test |
sundaySundaySUNDAY!!!!
Required reading:
"These are good men who just happen to hold different beliefs. Like, for instance, you believe in free enterprise and unalienable rights, while they believe you should be their bitch."
Now that's some wisdom.
Jeff Goldstein has been a daily read for me since my earliest days on the web.
If you have ever witnessed or been a participant in an important public event and then found the subsequent reportage to be not quite on the mark... then you might consider following Mr. Goldstein around, too.
Language, intent, control, and what tomorrow may look like. Depending on who controls who gets to think and what they think, of course.
"These are good men who just happen to hold different beliefs. Like, for instance, you believe in free enterprise and unalienable rights, while they believe you should be their bitch."
Now that's some wisdom.
Jeff Goldstein has been a daily read for me since my earliest days on the web.
If you have ever witnessed or been a participant in an important public event and then found the subsequent reportage to be not quite on the mark... then you might consider following Mr. Goldstein around, too.
Language, intent, control, and what tomorrow may look like. Depending on who controls who gets to think and what they think, of course.
Monday, October 11, 2010
Have You Noticed?
Reloading powders are suddenly very expensive. Or maybe I just noticed. I knew that black powder was already way past silly as far as cost goes.
I'm in the middle of working up some Mosin food, using projectiles pulled from some truly horrible Pakistani production milsurp .303. I have arrived at the end of an inherited can of H4895 and went out to pick up another pound and found they wanted $25.00.
The election hasn't even been stolen yet. Sheesh.
I'm in the middle of working up some Mosin food, using projectiles pulled from some truly horrible Pakistani production milsurp .303. I have arrived at the end of an inherited can of H4895 and went out to pick up another pound and found they wanted $25.00.
The election hasn't even been stolen yet. Sheesh.
Tuesday, October 05, 2010
Thursday, September 09, 2010
Oh My Goodness!
What kind of outfit lets a drunk monopolize a microphone at a public event?
"Later in his impromptu speech Mr. Sha turned to an American colleague, singling out Bob Orr, from the executive office of the secretary-general.
"I really don't like him: he's an American and I really don't like Americans," he said.
A second senior UN official who was at the dinner said: "It went on for about ten or fifteen minutes but it felt like an hour.""
Mr. Sha needs himself a cold beer in the Rose Garden. That would set him right up.
(via Instapundit)
"Later in his impromptu speech Mr. Sha turned to an American colleague, singling out Bob Orr, from the executive office of the secretary-general.
"I really don't like him: he's an American and I really don't like Americans," he said.
A second senior UN official who was at the dinner said: "It went on for about ten or fifteen minutes but it felt like an hour.""
Mr. Sha needs himself a cold beer in the Rose Garden. That would set him right up.
(via Instapundit)
Tuesday, September 07, 2010
School is Back in Session
Prepare and eat a light meal, refill your glass, then open your philosophy book to:
"That is, the Founding Fathers took the English constitutional principles, the institutional forms that already existed in the colonies, and set them down on paper. They were not inventing a new society. They only unified and systematized already existing principles. So this is not a revolutionary movement in any way. As a counterbalance to this, some movements which, in the Brazilian popular culture, in the Brazilian mass media, and school textbooks, are regarded as reactionary and anti-revolutionary, such as the Italian Fascism, or even Nazism, are obviously revolutionary. Why? Because they raised the proposition of a radically new society: they would destroy all existing institutions and rebuild everything from scratch. In the German case, this was an even more radically revolutionary because the foundations of the new society to be created were derived from a recent science, evolutionist biology."
You may need to break this up over a few sittings. It's worth your time.
What makes a revolutionary a revolutionary? Just where did the movement of "movements" origniate? I never really gave it much thought.
(via protein wisdom)
"That is, the Founding Fathers took the English constitutional principles, the institutional forms that already existed in the colonies, and set them down on paper. They were not inventing a new society. They only unified and systematized already existing principles. So this is not a revolutionary movement in any way. As a counterbalance to this, some movements which, in the Brazilian popular culture, in the Brazilian mass media, and school textbooks, are regarded as reactionary and anti-revolutionary, such as the Italian Fascism, or even Nazism, are obviously revolutionary. Why? Because they raised the proposition of a radically new society: they would destroy all existing institutions and rebuild everything from scratch. In the German case, this was an even more radically revolutionary because the foundations of the new society to be created were derived from a recent science, evolutionist biology."
You may need to break this up over a few sittings. It's worth your time.
What makes a revolutionary a revolutionary? Just where did the movement of "movements" origniate? I never really gave it much thought.
(via protein wisdom)
Saturday, September 04, 2010
Subscribe to:
Posts (Atom)